:	May 30, 2007

.

Remove the front bumper cover.

.

Remove the windshield washer reservoir filler neck.   Release the windshield washer reservoir filler neck from the coolant expansion tank.   Remove and if necessary, discard the seal.

.

:   Some fluid spillage is inevitable during this operation. Disconnect the 2 hoses from the windshield washer reservoir pumps.   Drain the washer reservoir fluid.   Disconnect the 3 electrical connectors.

.

Remove the windshield washer reservoir.   Remove the 4 bolts.

.

:   Do not disassemble further if the component is removed for access only. Remove the windshield washer pump.   Remove and if necessary, discard the seal.

.

Remove the headlamp washer pump.   Remove and if necessary, discard the seal.

.

Install the windshield washer pump.   If necessary, install a new seal.

.

Install the headlamp washer pump.   If necessary, install a new seal.

.

Install the windshield washer reservoir.   Tighten the M6 bolts to 6 Nm (4 lb.ft).   Tighten the M8 bolt to 25 Nm (18 lb.ft).

.

Connect the 2 hoses to the windshield washer reservoir pumps.   Connect the electrical connectors.

.

Install the windshield washer reservoir filler neck.   If necessary, install a new seal.   Lubricate the seal.   Secure in the clip.

.

Install the front bumper cover.